LIQUID RELEASE is a blend of evaporating, residue free
release agents for use in the imprinting process to allow the clean
release of texturing tools from concrete or overlay surfaces.
Allows a clean bond break between fresh concrete or overlay and
Allows the contractor to correct mistakes as they stamp the surface.
It is residue free.
It may be troweled on.
Concrete can be sealed with water base or solvent base sealer.
Pleasant Bubblegum aroma.
After the concrete has been colored and is ready to be stamped,
wet stamping mats once with DECOSUP Liquid Release, and using a
pump sprayer apply release over area to be immediately stamped.
Do not get too far ahead as the release will evaporate and a second
application may be needed. Stamp as usual, and if you see any mistakes
as you stamp, you can re-trowel and re-stamp the area if needed.
Apply freely and as much as you need. Allow evaporating and then
antique or seal as desired.
After polymer overlay is set enough wet stamping mats with DECOSUP
Liquid Release and spray with a pump sprayer over area to be immediately
stamped, do not get too far ahead as the release will evaporate,
and a second application may be needed. Stamp as usual, and if you
see any mistakes as you stamp, you can re-trowel and re-stamp the
area if needed. Apply freely and as much as you need. Allow evaporating
and then antique or seal as desired.
It is highly recommended to develop and follow a routine maintenance
schedule for all colored concrete so that it will maintain a top
quality appearance. Every 24 to 60 months, colored concrete installations
should be inspected, cleaned and resealed as required by volume
and intensity of traffic. The need will depend on a number of factors
including traffic conditions, geographical location and weather.
Inconsistencies in job site conditions, finishing practices, and
curing methods may produce variations in the color of the finished
800 to 1000 square feet per each 5 Gallon pail.
This product should be handled with care. For more information please
see DECOSUP LIQUID RELEASE MSDS.
READ COMPLETE MATERIAL SAFETY DATA SHEET BEFORE APPLICATION AND
USE. This is a combustible liquid. May cause skin, eye
or respiratory irritation during its application and use. Keep away
from flames or heaters, use in a well-ventilated area. Do not take
internally. Do not get into eyes, skin or clothes, wear a NIOSH
approved respirator, protective clothing and gloves, keep away from
DECOSUP LIQUID RELEASE is warranted to be of uniform quality
within manufacturing tolerances. Since control is not exercised
over its use, no warranty, expressed or implied, is made as to the
effects of such use. Seller and manufacturer's obligation under
this warranty shall be limited to refunding the purchase price of
that portion of the material proven to be defective.